Frameless Corner Shower Showcase

Bathrooms with corner showers are very popular in the area. Single family homes built from the 1980’s on often have master bathrooms with a shower pan (tiled or acrylic) located directly beside a soaking tub. This layout requires glass on two sides to fully enclose the shower. Here are three corner shower doors we recently installed near our shower door showroom in Frederick County, MD.

Frameless Glass Corner Shower in Frederick, MD


We installed this corner shower enclosure in early February 2017, and it is a great example of how this bathroom layout can be used to great effect. This homeowner in Frederick had custom tile walls and a custom stone shower pan installed beside their soaking tub. By extending the horizontal run of the notched stationary glass panel beside the shower door, we were able to incorporate the tub deck as functional storage space within the shower. The return panel was positioned as close to the tub as possible, giving the homeowner a place for shampoo and conditioner bottles beyond the tiled wall niche. This makeshift ledge also helps with the delicate balancing act of shaving one’s legs!

Frameless Glass Corner Shower in Urbana, MD


Sometimes homeowners prefer to leverage the tub deck for bath use instead of shower use, however. You have to put those aromatherapy candles somewhere, after all! Since we installed a glass corner shelf for this client in Urbana, they did not need extra space for shampoo and conditioner bottles. So the notched inline glass panel beside the shower door uses the minimum setback of 3/4″ – positioning the return panel on the tub deck as close to the innermost edge as possible. This is a handsome unit with an upgraded Aria shower door handle and Aria through-the-glass robe hook, both supplied by Portals Hardware.

Frameless Glass Corner Shower in Walkersville, MD


Not all corner shower doors are located beside soaking tubs. This project in Walkersville, for instance, just needed a narrow stationary panel at 90-degrees to fully enclose an otherwise linear layout. Because of the layout of the bathroom, we engineered this shower enclosure using glass-to-glass hinges, attaching the shower door to a stationary glass panel instead of the wall. By using slightly thicker glass panels (1/2″ instead of 3/8″), we are able to safely hinge shower doors off of adjacent inline panels in this manner. The homeowner selected oil rubbed bronze shower door hardware to match the fixtures in their bathroom. They also upgraded the standard c-pull shower door handle to a square pull.